125X250mm 5ply Radial Tire Repair Patch

General Info.

 

Part No.: RP-T1252

Specification: 125x250mm 5Ply

Packing: 10pcs/box, 12box/CTN

 

Selling Points

 

1. Each reinforcing ply individually end-wrapped to reduce tire flexing stresses in a unique way.

 

2. Tie-gum construction prevents delamination, which is common in other products.

 

3. Designed for chemical vulcanization or low-temperature systems.

 

4. Gray vulcanizing gum with blue poly backing.

 

Quality Guaranteed

 

High-quality product, comparable to Rema Tip Top and Tech. Samples are available for testing and evaluation.

 

Description

 

HOPSON provides a wide range of radial-ply repair patches designed to meet the needs of passenger, truck, and OTR tires. These thick, rubber-reinforced patches can be placed in any direction. The special design and formulation allow the patch to flex and resist heat, ensuring a lasting repair.

INSTRUCTIONS

• Inspect the tire for repairability using the manufacturer's guidelines or HOPSON LAB standards. If repairable, mark the injury with a crayon and remove the object carefully.
• Probe the injury to determine its size and direction, removing all debris.
• Choose the appropriate repair patch based on the injury and tire type. Apply prebuff cleaner to the area and use a rubber scraper to remove dirt and lubricants. Use a carbide cutter to drill the injury channel three times from the inside and three times from the outside, ensuring all damaged and rusted cables are removed, leaving only good rubber.
• Cement the injury channel with Chemical Vulcanizing Cement and install the correct vulcanizing insert. Trim flush with the tire inner liner. Mechanically buff the repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to the buffed area, working it into the rubber and allowing it to dry thoroughly.
• Remove the backing and center the repair patch over the injury. Thoroughly stitch it down from the center outwards to eliminate trapped air.
• Finish the repair by applying Inner Liner Sealer around the edge of the patch and over the buffed area.

General Info.

 

Part No.: RP-T1252

Concrete machinery

Concrete machinery products are mainly used in road construction, railway construction, real estate construction, power infrastructure construction, rail transit infrastructure construction and other fields, and its product performance must meet the needs of these industries. The impact of downstream industries on the concrete machinery industry is mainly in terms of market demand and market competition. The development of the concrete machinery industry depends on the pull of the downstream industries, but also restricts the development of these industries.

Concrete pump; Concrete pump truck; Concrete mixer; Concrete mixing building; Conveyor pump

Shandong Nuoman Engineering Machinery Co., Ltd , https://www.chinanuoman.com