After the transformation of the air compressor in the factory, the air compressor, the cold dryer, the micro-heat drying tower and other ancillary equipment can be automatically controlled. According to the pressure of the compressed air gas turbine tube of the factory (meter), the start and stop of these equipments are automatically adjusted. , plus uninstall. By setting different starting and stopping sequences, each air compressor can correspond to a unique set of start and stop loading and unloading pressure setting values ​​according to the priority of its own starting and stopping sequence. When the pressure of the main pipe is lower than the load setting value, the air compressor automatically starts loading; when the pressure of the main pipe is higher than the unloading set value, the air compressor is automatically unloaded; when the unloading is more than half an hour, the pressure of the main pipe of the system is considered to be stable. The air compressor is no longer required to be loaded, and the air compressor is stopped. When a single air compressor, cold dryer, or micro-heat drying tower equipment needs to be repaired and maintained, the operating personnel can put the equipment to the inspection state, then the system rejects the equipment and continues to execute the automatic control program to control the other. A device that functions normally and can be put into normal operation. After the system is rebuilt, the air compressor system has fully realized the remote automation control, which greatly reduces the cumbersomeness of the operation personnel's monitoring and operation, and ensures the timeliness and effectiveness of the equipment's retreat, so as to ensure the reliable operation of the system. Sex, stability and high efficiency have made the most outstanding contribution, which is the core symbol of remote automation control of air compressor system. Slim Rotary Damper mainly used for small diameter, long height space. Shaft damper is used to dampen drives, control speed, and many other applications. Shaft damper are widely used in invisible screens. Shaft damper can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
NOTE:
1. Please contact the corresponding product engineer for
specific torque products
2. Max. rotation speed: 50r/min
3. Max. circle rate: 5 cycle/min(Clockwise180 °, 180 ° anti-clockwise for 1 cycle)
4. Operating temperature: -10~50℃
5. Storage temperature:-30~80℃
Applied torque: (T)
Test Temperature: 23+/-5℃
Rotating speed:20r/min
Durability test Method:Clockwise 180 °, 180 ° anti-clockwise
Rotating speed: 20r/min
Test Frequency: 1cycle/min
Test Temperature: 23±5℃
Durability test cycle: 50000cycle
Test result criteria: Store in the room temperature for 24 hours or more after the test, recording to the torque T=T±30%T.
Shaft Damper,Drive Shaft Damper,Crankshaft Damper,Flexible Shaft Coupling Shenzhen ABD Equipment Co., Ltd. , https://www.abddamper.com
