Operation Desk,Operation Desk For Flying Saw System,Operation Controlling Table,Controlling Working Desk Jiangyin Lingji Automation Equipment Co., Ltd. , https://www.lingjimachine.com
In recent years, with the improvement of industry standards and the increase of market requirements, the universal grinder has been machined to achieve a smooth surface on the original frame, which has changed the phenomenon of coarse powder accumulation on the inner walls of previous models, making medicines The production of products in the fields of food, chemical and other industries is more in line with national standards, so as to meet the requirements of GMP.
At the same time, Universal Crusher is also a green and environmental-friendly machinery and equipment. It has no pollution and low noise. It is equipped with a separate material collection room and dust collection room so that the dust can be fully collected to meet customers' requirements for cleanliness.
From the point of view of structural design, the blades of the universal grinder crusher blade group increase the airflow in the crushing chamber, which can ensure the output and reduce the temperature generated during crushing. It is more suitable for crushing some liquids with poor flow and stickiness. Material.
According to the industry, the universal crusher can also be equipped with a water cooling device according to the user's special requirements and the special physical and chemical properties of the crushing material.
For example, the material to be crushed has a low melting point, a low burning point, and is susceptible to soft and sticky heat, which may easily lead to a reduction in the crushing effect or failure to pulverize, and may even cause burning, explosion, etc., which is necessary to add to the universal pulverizer equipment. Water cooled cooling device.
According to reports, the universal water-cooling device of the universal crusher is equipped with a sealed water clip on the front wall and the rear wall of the crushing chamber, so that flowing tap water or well water continuously flows into the rear wall water clamp, and then flows into the front wall. The water clip is then returned to the back wall by the water clip on the front wall and flows out from the outlet of the back wall. The purpose of the water cooling device is to reduce the temperature in the crushing chamber.
At present, the Universal Water Cooler is suitable for material crushing in the pharmaceutical, chemical and food industries. It is especially suitable for the crushing of medium and low hardness crude fiber materials such as astragalus, licorice, campanulaceae, angelica, dried ginger, and dried vegetables, so that it can be completely crushed into fine powder.
It is worth noting that the universal crusher is susceptible to clogging due to the high feed rate and increased load. Therefore, in the industry, it is recommended that during the feeding process, attention should be paid to the large deflection angle of the ammeter pointer.
If the rated current is exceeded, it indicates that the motor is overloaded and overloaded for a long time and the motor will be burned. Once this happens, the material door should be immediately reduced or closed, or the feeding method can be changed, and the feeding amount can be controlled by adding feeders. There are manual and automatic feeders. The user should select a suitable feeder according to the actual situation.
In addition, the crusher has a high rotation speed, a large load, and a strong load fluctuation. Therefore, the current of the universal pulverizer is generally controlled at about 85% of the rated current.
From the user's point of view, the characteristics of the equipment, process routes, and GMP standards are all key factors in equipment selection. As far as universal smashing equipment manufacturers are concerned, strengthening technological innovation and developing customer-satisfactory equipment are the company's focus on the market.
Universal crusher is a crushing device with simple structure, strong operation, stable operation, easy cleaning, and good crushing effect. The pulverized material can be directly discharged from the grinding chamber of the main machine. The size of the crusher can be obtained through the replacement of mesh screens with different apertures. In pharmaceuticals, food, chemical, and some processing plants, its smashing in different materials and in different environments can meet the needs of the industry.