Among the whole set of mineral processing production lines, there are many reasons for the failure of the mineral processing equipment. Environmental factors, material conditions, quality of the relevant operators, management level, human-machine linkage, human factors, the quality of the equipment itself, etc. may cause the mineral processing equipment to malfunction. . In the event of a fault in the ore dressing equipment, the cause of the failure of the ore dressing equipment must be identified, and a reasonable solution should be made for the cause. The best ways to solve common faults in mineral processing equipment are: 1. The coupling bracket bolts are loose and the bearing housing bolts are loose. Solution; view and stabilize the bolts. 2, transmission organization noise is large Solution: The gears are smooth and short. 3. Gear spacing changes. Solution: Add smooth grease and stabilize the bolts. 4, broken oil or seal damage Solution: Repair and clean the valve for a long time with less repair and cleaning, refueling or replacing the seal according to the rules.
Our Rockstar Products including Radial Truck Tyre,Radial Bus Tyre, Solid tyre, Forklift tyre, OTR tyre, M/T with
various sizes and patterns available.
The Rockstar tyre has passed the ISO 9001, ISO/TS16949, DOT, ECE, GCC certificaton depends on the superior
product quality.
ROCKSTAR tyres have been exported to North Amereca, South America, Africa, the Middle East and Southeast
Asia.We have done OEM for several well-known brands.
All the TBR Sizes: 7.50R16 8.25R16 8.25R20 9.00R20 10.00R20 11.00R20 11.00R22 12.00R20 12.00R24
11R22.5 12R22.5 13R22.5 11R24.5 295/75R22.5 295/80R22.5 285/75R24.5 315/80R22.5 385/65R22.5
Truck Tyre,Bus Tyre,Light Truck Tyre,Bus Radial Tyre SINOMICC INTERNATIONAL , https://www.rockstartyre.com
The reasonable pattern tilt angle guarantees a good self-cleaning capacity.
After long-term development, the mineral processing equipment has become an efficient and energy-saving mineral processing equipment, greatly improving the mining rate of mineral resources and avoiding waste of resources. However, in the process of using the mineral processing equipment, some faults will occur more or less, which will affect the production efficiency of the mineral processing equipment.