Mine survey

Mine surveying, in the mine construction and mining process, surveying and mapping work for mine planning and design, exploration and construction, production and operation management, and mine scrapping. Its main tasks are:

1 Establish mine site and control network and surveying 1: 500-1: 5000 topographic map and mine map; 2 Conduct construction survey and completion acceptance survey of various ground and underground mines; 3 Perform deformation monitoring of rock and surface movement, The main work content for protecting pillars and safe mining is: to establish the ground control network of the mining area, the mapping of the topographic map of the mining area, the measurement of mine construction, the observation of surface movement settlement and the drawing of ore body geometry. Among them, mine construction survey is the measurement work carried out for the construction of various projects during mine construction and mining, that is, civil engineering survey on the ground, downhole control measurement and construction survey, shaft orientation measurement and shaft lead elevation measurement, shaft Through measurement. During the construction and operation and operation and management stages, it is also necessary to regularly observe the sedimentary observation of rock strata and surface, the settlement observation and displacement observation of various parts of the roadway and the body and its related buildings and auxiliary buildings, and the rehabilitation of the mining area. Measurement services, etc.

2. 3D laser scanner for mine measurement

The use of laser scanners for terrain and mine surveying is currently the world's most advanced measurement technology. Because laser scanners can acquire data at very high resolutions and obtain 3D data, it is easy to generate digital elevation models that are more accurate than other conventional measurement methods. Compared with the traditional GPS+ total station measurement operation mode, the operation efficiency is higher, the advantage is very obvious, and the work intensity of the field personnel is greatly reduced.

 These bearings are the most common type and are used in a wide variety of applications.

Single-row deep groove Ball Bearings are the most common type of rolling bearings. Their use is very widespread.
In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.For big deep groove ball bearings, machined brass cages are used.Machined cages are also used for high speed applications.

Deep Groove Ball Bearing

Deep Groove Ball Bearing,Small Deep Groove Ball Bearing,Inch Deep Groove Ball Bearing,R Series Deep Groove Ball Bearing

Ningbo Ritbearing Imp & Exp Co.,Ltd. , https://www.nbbearing.de