Single Sided Adhesive Electrical Tape Single Sided Adhesive Electrical Tape,Insulation Electrical Tape,High Viscosity Electrical Tape,Good Waterproof Electrical Tape Shanghai Huike New Material Technology Co., Ltd. , https://www.shhuike.com
IS, ISR, ISY series centrifugal pump
This series is a single-stage, single-suction, cantilevered centrifugal pump manufactured according to the ISO2858 standard. It is designed for delivering clean water or liquids with physical and chemical properties similar to water without solid particles.
Capacity: 3~500 m³/h
Head: 3~150 m
Working Pressure: 1.6 MPa
Working Temperature: 85~130°C
Seal Type: Packing, Mechanical Seal
SH, S, SA series double suction axial split centrifugal pump
This series is a single-stage, double-suction, axial split centrifugal pump used for conveying liquids with properties similar to water. It is widely applied in water supply and drainage systems for plants, mining, cities, power stations, farmland irrigation, and large-scale hydraulic projects.
Inlet and outlet are aligned along the pump axis, horizontally perpendicular to the axis, easy to maintain and low cavitation.
Capacity: 126~10080 m³/h
Head: 8.6~140 m
Working Pressure: ≤1.6 MPa
Working Temperature: ≤130°C
Seal Type: Packing, Mechanical Seal
SN series double suction axial split centrifugal pump
This series is a single-stage, double-suction, axial split centrifugal pump used for delivering clean water or corrosive liquids. It is commonly used in water supply systems, chemical mines, irrigation systems, and large-scale hydraulic projects.
Inlet and outlet are aligned on the pump axis, horizontally perpendicular to the axis, high efficiency, low cavitation, noise and vibration reduction, and easy maintenance.
Capacity: 1000~12000 m³/h
Head: 12~120 m
Working Pressure: ≤1.6 MPa
Working Temperature: ≤130°C
D, DF, DY, MD series multistage sectional centrifugal pump
This series is a single-stage or multistage, sectional centrifugal pump with horizontal inlet and vertical outlet. It is used for delivering clean water or non-corrosive liquids, and after material changes, it can also handle hot water, oil, corrosive, or abrasive liquids.
It has advantages such as high efficiency, low noise, long service life, and a wide performance range. Manufactured according to GB5657 standards.
Capacity: 3.75~850 m³/h
Head: 19~916 m
Temperature: D, MD: ≤80°C; DF, DY: -20~105°C
Seal Type: Packing, Mechanical Seal
DG series high-pressure boiler feed water pump
This series is a single-suction, multistage, sectional centrifugal pump used for delivering clean water or non-corrosive liquids. After changing the material, it can also deliver corrosive liquids. It features an advanced structure, good performance, energy saving, and is suitable for boiler feeding, factory, and city water supply.
Capacity: 45~750 m³/h
Head: 740~2150 m
Working Temperature: ≤210°C
Seal Type: Packing, Mechanical Seal
DC, DCF series boiler feed water pump
This series is a single-suction, multistage, sectional centrifugal pump, which is a low-capacity boiler feed water pump. After changing the seal type and wet-end parts material, it can also be used as an oil transfer pump or anti-corrosive pump (DCF). This series pump has the advantages of good rigidity structure, smooth operation, long service life, and high efficiency. The pump inlet and outlet are both vertically upward.
Capacity: 3.5~130 m³/h
Head: 82~1000 m
Working Temperature: ≤110°C
Seal Type: Packing, Mechanical Seal
Series LDTN, LDTNA, LDTNB condensate pump
This series is a vertical, multistage, barrel-type centrifugal pump. The pump intake and discharge are located on the pump cylinder and discharge base respectively, which can turn 90° and 180°. The impeller is closed type, and the first stage impeller has two types—single suction and double suction.
It is mainly used to handle condensate water in generator set systems. It can also handle liquids with physical and chemical properties similar to water in NPSH-limited or base-limited chemical processes.
Capacity: 85~2600 m³/h
Head: 48~380 m
Working Temperature: ≤80°C
Series IH chemical pump
This series is a single-stage, single-suction, cantilevered centrifugal pump that applies the ISO2858 standard. It is an energy-saving, updated product that replaces the F series anti-corrosive centrifugal pump.
It can handle corrosive liquids and those with viscosity similar to water in chemical processes and is widely used in chemical, metallurgy, power, pulp, food, pharmacy, and synthetic fiber fields.
Capacity: 3~450 m³/h
Head: 5~125 m
Working Temperature: -85~+105°C
Working Pressure: 1.6 MPa
Series MSC standard chemical process pump
This series is a horizontal, single-stage, single-suction standard chemical pump. Its size and performance conform to DIN24256/ISO2858 standard. The performance range of this pump includes the entire IH series pumps but with higher efficiency and better NPSH than IH pumps. This pump is interchangeable with IH pumps.
It is used to handle low-temperature or high-temperature, neutral or corrosive, clean or solid-contained liquid.
Capacity: ~2000 m³/h
Head: ~160 m
Working Temperature: -80~+300°C
Working Pressure: ~2.5 MPa
Series MZA, MZE, MZF, MZU standard chemical process pump
This series is a horizontal, single-suction, single-stage, spiral casing, radial profile, cantilever chemical process pump. Series MZA is basic angle support, while series MZE, MZF, MZU is central line support. It applies standard API610 or ISO2858.
It is used to handle low-temperature or high-temperature, neutral or corrosive, clean or solid-contained liquid and has the features of high efficiency, low NPSH, high working temperature, running smoothly, low noise, and gentle performance curve.
Capacity: ~2600 m³/h
Head: ~300 m
Working Temperature: -80~+450°C
Working Pressure: ~13.5 MPa
Series GY, GYU convenient disassembly pipe oil pump
This series is a single-stage, single-suction, vertical centrifugal pump with radial profile casing. It applies API610 standard and is the standard pump type of OH3.
It handles clean water, petroleum containing small amounts of solid, liquefied gas, or corrosive medium and has the features of high efficiency, small vibration, low noise, long service life, and wide range of use.
Capacity: ~3000 m³/h
Head: ~200 m
Working Temperature: -35~+105°C
Working Pressure: 1.6 MPa
Series MSM chemical process pump
This series is a horizontal, double-suction, single-stage, spiral case, axial profile, supports at both ends, centrifugal pump. It applies the standard API610 or ISO2858, and is the standard pump type of API610-BB1.
It is suitable for handling heavy duty, large capacity, high head, high temperature, neutral or corrosive liquid, especially crude oil transportation of oil pipeline. It is widely used in petroleum, chemical, liquefied petroleum gas areas and has the features of high reliability, long service life, and high efficiency.
Capacity: ~8000 m³/h
Head: ~250 m
Working Temperature: ~200°C
Working Pressure: ~5 MPa
Series AY, AYS heavy duty large centrifugal oil pump
This series is a single-stage (or double-stage), double-suction (or single-suction), supports at both ends large centrifugal oil pump. Pump casing is radial profile and applies API610 standard and is the standard BB2 pump type.
It is suitable to handle clean or slight oil contain solid medium and is widely used in oil refining, chemical industry and other hydrocarbons industrial field.
Capacity: ~10000 m³/h
Head: ~450 m
Working Temperature: -45~+450°C
Working Pressure: ~5 MPa
Series KY, KSY, KDY horizontal split centrifugal oil pump
This series is a horizontal split centrifugal pump, applies API610 standard, is the standard BB1/BB3 pump type. Pump casing is axial profile and has two installation methods: basic angle and central line.
This kind of pump has the feature of compact structure, high efficiency, wide range of high efficiency area, better NPSH and running smoothly. They are widely used boiler feed water, diversion project, oil refining, chemical industry and other hydrocarbons industrial field.
Capacity: 25~8000 m³/h
Head: 60~1500 m
Working Temperature: -40~+200°C
Series MMC multistage sectional form, centrifugal pump
This series is a single suction, multistage, sectional form centrifugal pump, API610-BB4 pump type. Pump Intake horizontal or vertical upward, pump discharge vertical upward. It handles clean, corrosive or non-corrosive liquid in high pressures, but not suitable for abrasive liquid. It has the feature of high efficiency, low NPSH.
Capacity: ~700 m³/h
Head: ~1400 m
Working Temperature: -50~+210°C
Working Pressure: ~15 MPa
Series MHB chemical process pump
This series of pump is horizontal, single suction for first stage or double suction, double casing for multistage, radial profile, supports at both ends, complete or partial out, barrel centrifugal pump. This pump applies the standard API610 or ISO2858, is the standard pump type of API610-BB5.
It is suitable to high temperature, high temperature or low temperature, neutral or corrosive liquids. It is widely used in petro, chemical, liquefied petroleum gas areas and has the feature of high reliability, long service life and high generalization.
Capacity: ~1000 m³/h
Head: ~2500 m
Working Temperature: -29~+450°C
Working Pressure: ~25 MPa
Series MVB chemical process pump
This series of pump is suspended, multistage, double casing, barrel centrifugal pump. Pump casing is radial profile which is designed for low NPSH. This pump applies the standard API610 or ISO2858, is the standard pump type of API610-VS1/VS6.
It is suitable to handle clean or slightly polluted, high temperature or low temperature, neutral or corrosive liquids. It is widely used in petro, chemical, liquefied petroleum gas, pipeline pressure areas and has the feature of high reliability, long service life and low NPSH.
Capacity: ~800 m³/h
Head: ~800 m
Working Temperature: -180~+180°C
Working Pressure: ~10 MPa
Series MYW chemical process pump
This series of pump is vertical, single stage, double suction (or single suction) centrifugal sump pump. It is suitable for big capacity, high head liquid handles. It applies the standard API610 or ISO2858, is the standard pump type of API610-VS2.
This kind of pump use for handle waste water, sea water, chemical medium in big capacity, such as sea water desalination, power plant circulating water, chemical liquids, industrial water, waste water disposal for domestic water and industrial water.
Capacity: ~10000 m³/h
Head: ~200 m
Working Temperature: ~200°C
Working Pressure: 1.6~2.5 MPa
1. IS Series Standard Centrifugal Pump Foot-mounted, single-stage overhung pump, and conforming to ISO2858 performance and dimensional, ISO3069 standard dimension for seal chamber. Suitable for general Industries, power generation, water system and mining.
Applications:
Agriculture, Shipping, Acid Transfer, Electronics, Water Supply and Distribution (water), Water Treatment, Pharmaceuticals, Auxiliary (chemical), Auxiliary Services (power), OEM, Cooling Water (metals), Renewable Fuel Production, Sewage Collection and Treatment, Dewatering and Water Supply (mining).
Industries:
Chemical processing, general Industries, power generation, water system and mining
Standards:
ISO, GB.
Product Features:
Horizontal, foot-mounted, single-stage, single-suction, radial-split and overhung centrifugal type.
Rolling-element bearing and oil ring lubrication with constant-level oiler.
Standard framework oil seals keep lubricant in and contaminants out.
ISO3069 seal chamber and a wide variety of seal configurations including packing seal and mechanical seal.
Cast Impeller is dynamically balanced to limit vibration and assure smooth operation over a wide flow range.
Operating Parameters:
Capacity: 5~450 m³/h
Head: 4~125 m
NPSHr: 2~5m
Pressure for Suction: ~0.6 MPa
Here is the rewritten and improved English version of your content, ensuring it exceeds 500 characters and reads more naturally:
---
---
Let me know if you'd like a more detailed or tailored version for a specific audience or purpose.