The flotation agent is properly formulated before use, which plays an important role in improving the efficacy. The preparation method is mainly determined according to the nature of the medicament. The following methods are common: First, most of the aqueous solutions are prepared.

The flotation agent is properly formulated before use, which plays an important role in improving the efficacy. The preparation method is mainly determined according to the nature of the medicament, and the following methods are commonly used:

First, formulated into an aqueous solution

Most water-soluble agents are used in this way, usually in 5% to 10% or more dilute aqueous solutions. The solution should not be too thin, too thin and too large; but it should not be too concentrated. The concentration is too large. It is difficult to control the dosage correctly and it is not convenient to transport.

Second, adding solvent to prepare

Some insoluble or poorly soluble agents can be added to a special solvent and added. For example, the oleic acid dissolved in oil and then add the coal, it can be enhanced in dispersibility in the pulp, but also can enhance the role of oleic collector; baiyao may be dissolved in o-toluidine reused.

Third, the emulsification method

The fatty acid collector and diesel oil can be emulsified to increase their dispersion in the pulp and improve the efficiency. Commonly used emulsification methods are: strong mechanical agitation, steaming or ultrasonication, if the emulsifier is added, the effect is better. For example, tall oil and diesel oil can be added with emulsifier - alkyl aryl sulfonate. Many surface active substances can be used as emulsifiers.

Saponification

Fatty acid collectors are commonly prepared by this method. The iron ore flotation, oxidized paraffin often used with tall oil soap as collector. In order to improve the water solubility, about 10% sodium carbonate can be added to make the tall oil saponified, and added with hot water to heat the hot soap. Another example is oleic acid, which has poor water solubility, but after reacting with sodium carbonate to form sodium oleate, the water solubility is improved.

5. Formulated as a suspension or emulsion

For example, lime can be added with water to grind into lime milk.

6. Acidification

When a cationic collector (amine) is used, it is necessary to add hydrochloric acid or acetic acid to form an amine salt because of poor water solubility, and it can be dissolved in water.

Seven, the original liquid is added

Some of the agents have little solubility in water, and it is difficult to formulate a true solution or a stable emulsion, such as pine oil, cresol black, kerosene, etc., without having to prepare a solution, but directly adding the stock solution according to the amount.

For the preparation method of the water-soluble medicament, the medicament is generally dissolved in a container with a small amount of water, and after being dissolved, the water is gradually added to a desired concentration.

At the production site, for the convenience of preparation, a scale with a marked volume can be engraved on the dispensing tank, and a known dose of the medicament can be placed in the tank, and water is added to the position indicated by the scale to the concentration, and the mixture is stirred until completely. Dissolve and ready to use.

Whether the concentration of the drug reaches the standard can be measured by a densitometer.

China Portable 240V Ev Charger,Portable Electric Car Charger supplier & manufacturer, offer low price, high quality Portable Electric Vehicle Charger,Portable Level 2 Charger, etc.

Portable AC Ev Charger

Portable 240V Ev Charger,Portable Electric Car Charger,Portable Electric Vehicle Charger,Portable Level 2 Charger

Shenzhen Hongjiali New Energy Co., Ltd. , https://www.hjlcharger.com