Bakery Equipment,Kitchen Electric Grill,Electric Oven,Commercial Kitchen Electric Grill Guangzhou Nernst Catering Equipment Co., Ltd. , https://www.nernstcatering.com
High Tension Electrostatic Separator is designed for the separation of titaniferous mineral sands, hard rock ilmenite and rutile, cassiterite, tantalite, wolframite, iron ore, as well as plastics from metals in waste recycling systems. This advanced technology leverages the differences in electrical conductivity among various minerals in the feed material. The High-Tension Roll Electrostatic Separator (HTR) utilizes a grounded roll to transport the feed through a high-voltage ionizing field (corona). Particles are charged by ion bombardment, and conducting particles transfer their charge to the grounded roll, allowing them to be thrown off due to centrifugal and gravitational forces. Non-conducting particles remain pinned to the electrode surface and are transported further around the roll before dropping off, either through charge dissipation or mechanical means such as brushes and AC wipers.
The throughput capacity of the separator is closely related to the roll speed, roll width, and the characteristics of the feed material. For smaller diameter rolls, higher rotation speeds are needed to maintain a consistent feed rate. However, at higher RPMs, coarse non-conductive particles may leave the roll too early, leading to misplacement in the conductor stream. Conversely, at lower RPMs, fine conductive particles may not gain enough inertia to be ejected, resulting in similar issues with the non-conductor stream. Therefore, optimizing the process requires adjusting the roll speed and electrode positions based on the physical properties of the particle mixture, including conductivity, size, and density.
Here is an overview of the key specifications:
| Model | JXSC-3212 | JXSC-3215 | JXSC2G-3212 | JXSC2G-3215 |
|----------------|----------------|----------------|------------------|------------------|
| Specification | 320X1200 | 320X1500 | 320X1200/2 | 320X1500/2 |
| Operating Voltage | 0–55kV | 0–55kV | 0–55kV | 0–55kV |
| Motor Power (KW) - Heat | 12 | 15 | 15 | 18 |
| Motor Power (KW) - Rotate | 2.2/1.5 | 2.2/1.5 | 2.2/2.2 | 3.0/3.0 |
| Electro Discharge | 0.09 | 0.1 | 0.15 | 0.18 |
| Feeding Size (mm) | 0.1–2 | 0.1–2 | 0.1–2 | 0.1–2 |
| Capacity (t/h) | 0.6–1.4 | 0.8–1.6 | 1–2 | 1.2–2.5 |
| Dia. of Stationary Electrode (mm) | 30 | 30 | 30 | 30 |
| Dia. of Corona Electrode (mm) | 0.4 | 0.4 | 0.4 | 0.4 |
| No. of Electrode Filament | 4 | 4 | 8 | 8 |
| Max. Operating Electrode Distance (mm) | 85 | 85 | 85 | 85 |
| Weight (t) | 0.7 | 0.8 | 1.8 | 2.2 |
| Overall Size (mm) | 1390×1980×1500 | 1390×2290×1650 | 1390×1980×2880 | 1390×2290×2880 |
This equipment is ideal for industrial applications requiring precise separation of materials with different electrical properties. Its design ensures efficient operation, low maintenance, and long service life, making it a reliable choice for mineral processing and recycling operations.