Neodymium Material Separation Magnets Ningbo Hope Magnet Co.,Ltd , https://www.hopemagnets.comBRIEF
*Video link: Â Â https://www.youtube.com/embed/YbFpssK2NMw
Â
HF-IM thermoformer is a trim-in-place type thermoforming machine that uses a steel-rule knife in the same mold to perform forming and cutting. The second and third cut stations are available for post-trim and hole-punching.
It is ideal for manufacturing parts from PP, PET, PS, etc., and can automatically produce disposable rectangular, square, or round-shaped containers and trays with forming, trimming, and stacking on a single operation cycle. Â Design Feature
Steel-Rule-Knife for forming and cutting in the same station
Trim-in-place for processing PP, PET, PS, PVC, BOPS materials, especially suitable for PP.
Second and third cut-presses available for hole punching and post-trim
Automatic stacking, counting unit, and conveying system
Trim-in-place for parts with rolled edges (turn-down lip)
Trim-in-place technology ensures neat and identical trimming (cutting)
Plug assistant for deep forming of draw
Floating knife and free knife available for post-trimming film with high shrinkage rate
Extra contact heat plate available to minimize power consumptionÂ
Â
Specification                     LX3122IM                Â
Mould Area                        Â
800*600mm Max.                  .
Depth of Draw under sheet
120 mm Max (others at request)
Depth of Draw above sheet
30 mm Max.  (others at request)
Clamping force
750KN
Suitable material Â
PPÂ PET PS PVC BOPS
Sheet Width                     Â
460- 850 mm                 Â
Material Thickness Range Â
0.2-1.5mm
Material Roll Diameter Â
1000Â Max
Dry run Speed
45cycles/min  Max.  Â
Power SupplyÂ
3-N AC380V±15V  ,(others at request)
Power consumption
Approx.35kilowatts/hr
Air PressureÂ
0.7Mpa
Air ConsumptionÂ
2500Â Liters/min Â
Cooling Water Consumption Â
13 Liters/min 15° - 20°C
Dimensions
9.5m*2.2m*2.2(L*W*H)
FAQ
1. What can IM Model do?
It produces clamshell, container, lid, tray, and dish with rolled-lip
2. What material IM model can process?
It can mainly process PP, PET, BOPS, PS, PVC sheet
3. What is MAX. speed of practical production?
 As far as we tested, it is 33 cycles/min for 0.2mm PET. For higher speed, we still need more testing
4. What is Trim-in-place and what is post-trim?
Trim-in-place means forming and cutting inside the same mold.
Post-trim means cutting after forming.
5. What is different among IM 2in1, IM 3in1, and IM 4in1?
 *IM-2in1 does forming and cutting in the same station with steel-rule-knife.
 It can make any packaging if there is no requirement of making holes on it.
 *IM-3in1 = IM-2in1 + second cut-press, it can do trim-in-place process and post-trim process. It means it can do cutting after forming station and in forming station.
 *IM-4in1 = IM-2in1 + second cut-press + third cut-press, it can do trim-in-place and post-trim process and also do hole-punching.
6. What is the advantage of trim-in-place?
* Bring identical trimming for parts made in film with high shrinkage rate like pure PP.
* No wasting time on adjusting accuracy of trimming
* No wasting money to make an independent cutting tool
Technical Support
Upon receiving the deposit, we will offer the following technical services:
1. Make drawings of your project for your approval after receiving your samples
2. Provide mould drawings.
3. Provide electric diagram.
4. Provide drawings of sensor layout, pneumatic layout, sensor layout and motor layout
5. Provide picture of labeling of all electric parts and pneumatic parts.
6. Free technical suggestions on adjusting of equipment layout and application.
5. Equipment upgrading (customers need to pay the cost);
Quality Assurance
1. Strictly conforming to ISO9001-2000 quality management system and Security conforming to CE;
2. Strict control from purchasing inspection, process inspection to final proofing;
3. Established several QC departments to execute quality control regulations;
4. Detailed quality control examples:
  (1) Complete files for quality control and quality feedback;
  (2) Strict inspection for the components to assure products free of damage and avoid rust-eaten and paint peeling off later on.
  (3) Only qualified components will be assembled and total equipment must be inspected completely before sale.
Â
After Sale Service
1. We can offer a full training in our factory on operation and maintenance
2. Installation and commissioning in buyer's factory is available with all cost caused by visit on buyer's account.
3. The warranty is one year. And after one year of warranty, service is still available with cost on buyer's account if it involves parts changing. 
Model NO.: LX3122HF-IM-B
Driven Type: Electric
Shaping Mode: Thermoforming
Raw Material: PP PS
Trademark: LX
Transport Package: Wooden Case and Plastic Film
Specification: CE
Origin: China
HS Code: 84774000
LX3122HF-IM-B High Quality Universal Thermoformer for Any Use