DIN2634 flange have two holes, can wear bolt, make the two flange tight even.Between the gasket seal.It is the connection of the two pipes, fittings or equipment, fixed on a flange, a first between the two German standard flange, and flange pad, bolt fastening together, complete the connection.According to the connection parts of flange and flange can be divided into the container.This product is mainly used in oil and gas pipeline engineering, the natural gas pipeline engineering, chemical plants, municipal engineering, sewage treatment, power plant, shipbuilding, pharmaceutical, dairy products, beer, beverage, water conservancy and other industries.DIN2634 flange will not produce corrosion, pitting, corrosion or wear and tear, play an important role and value in use, used in different industries and fields.
Butt welding flange is two large diameter pipe connection device, usually two flange and number of the bolt, its plastic strength is low, after adding suitable amount of carbon becomes hard, plastic lower strength enhanced.Connection it may need to bear very high tensile, compression, torsion and shear strength.Butt welding flange conveniently, manufacture simple, low cost, widely used, but with poor rigidity, therefore shall not be used for supply and demand, flammable, explosive and high vacuum degree requirements of the chemical process piping systems and height, extremely dangerous situations.Sealing surface type plane and surface.Butt welding flange welding electrode consumption is much, can not stand high temperature, high pressure, repeated bending and temperature fluctuations.
Din2634 Pn25 Welding Neck Flange Din2634 Pn25 Welding Neck Flange, Pn25 Flange, Forged Din2634 Pn25 Flange Hebei Jimeng Highstrength Flange-tubes Group Co.,Ltd. , https://www.jimengflange.com
PDSS-00 filled bottle conveyor line is constituted by a number of conveyor modules, configurated and connected in accordance with the actual requirements. It mainly contains a basic transport unit, no-pressure transmission unit, bottle deposit station, etc. The conveyor plays transport and storage functions in the whole production line, so that the containers could convey between the various single machine in the filling production line.
For different containers, different chain plate materials are selected. For PET bottles adopt plastic-steel chain plates and for glass bottles or cans use stainless steel chain plate.
Main features:
Modularized unit design
Modularized unit design contains many features, such as diversification, simplicity, strong interchangeable parts, easy installation and maintenance, etc. According to different requirements, production capacity and varieties of boxes, Modularized unit design could supply different conveying ways, modular unit, electrical motor, control mode. So it is very flexible.
The conveying is smooth and reliable
The installation of bottle conveyor guardrail is according to calculation requirements; At curve and lane changing place, the variation of each bottle-belt speed calculate by experiment and theory(increase or decrease geometric progressively); Add ing synchronous control between conveying belt and engine, make bottles in good condition in the conveying: Non-falling, non-block, non-jam.
Electrical control of the case conveying system is advanced and reasonable
In order to prevent bottle squeezing, bottle explosion in the bottle transportation, especially in high speed line, bottle belt control adopts both interlocking and simple control.
Control components have proximity switch, photoelectric tube and so on.
Control methods are multifarious. In order to achieve steady conveying, we can select practicable control method according the design requirements of plane layout.
Bottle belt is compact in structure, low noise.
Bottle conveying belt motor adopts direct connection between motor and bottle belt capstan instead of traditional chain sprocket drive, compact in structure, low noise.
Easy operation
Adopts centralized control method, normal buttons control.
Lubrication method
Adopts centralized and manual lubrication methods, time-saving, labor-saving.
Technical parameters
Maximum capacity: 48000BPH (TakeØ 75 bottle for example)
Unistrand maximum speed: Vmax=72m/min
Applicable container: Beer bottle, PET bottle, Pop can
Unistrand conveyor cross section dimension(W× L): 116× 145mm
Link joint pitch: 38.1mm
Link joint width: 82.6mm
Chain pitch: 85mm
Water for spray lubrication: 2~3 m3/h
Standard height: 1050 mm
Installed capacity: According to the layout
Newamstar Packaging Machinery Co., Ltd.
General Description
PDSS-00 filled bottle conveyor line is constituted by a number of conveyor modules, configurated and connected in accordance with the actual requirements. It mainly contains a basic transport unit, no-pressure transmission unit, bottle deposit station, etc. The conveyor plays transport and storage functions in the whole production line, so that the containers could convey between the various single machine in the filling production line.
For different containers, different chain plate materials are selected. For PET bottles adopt plastic-steel chain plates and for glass bottles or cans use stainless steel chain plate.
Main features:
Modularized unit design
Modularized unit design contains many features, such as diversification, simplicity, strong interchangeable parts, easy installation and maintenance, etc. According to different requirements, production capacity and varieties of boxes, Modularized unit design could supply different conveying ways, modular unit, electrical motor, control mode. So it is very flexible.
The conveying is smooth and reliable
The installation of bottle conveyor guardrail is according to calculation requirements; At curve and lane changing place, the variation of each bottle-belt speed calculate by experiment and theory(increase or decrease geometric progressively); Add ing synchronous control between conveying belt and engine, make bottles in good condition in the conveying: Non-falling, non-block, non-jam.
Electrical control of the case conveying system is advanced and reasonable
In order to prevent bottle squeezing, bottle explosion in the bottle transportation, especially in high speed line, bottle belt control adopts both interlocking and simple control.
Control components have proximity switch, photoelectric tube and so on.
Control methods are multifarious. In order to achieve steady conveying, we can select practicable control method according the design requirements of plane layout.
Bottle belt is compact in structure, low noise.
Bottle conveying belt motor adopts direct connection between motor and bottle belt capstan instead of traditional chain sprocket drive, compact in structure, low noise.
Easy operation
Adopts centralized control method, normal buttons control.
Lubrication method
Adopts centralized and manual lubrication methods, time-saving, labor-saving.
Technical parameters
Maximum capacity: 48000BPH (TakeØ 75 bottle for example)
Unistrand maximum speed: Vmax=72m/min
Applicable container: Beer bottle, PET bottle, Pop can
Unistrand conveyor cross section dimension(W× L): 116× 145mm
Link joint pitch: 38.1mm
Link joint width: 82.6mm
Chain pitch: 85mm
Water for spray lubrication: 2~3 m3/h
Standard height: 1050 mm
Installed capacity: According to the layout
Newamstar Packaging Machinery Co., Ltd.
Model NO.: PDSS
Trademark: Newamstar
Specification: CE, SGS, ISO
Origin: China
HS Code: 842230
Model NO.: PDSS
Trademark: Newamstar
Specification: CE, SGS, ISO
Origin: China
HS Code: 842230
General Description