Solar Mini Water Pump, Solar DC Pump          * Solar Water Heating Systems     * Hot Water Circulation         * Radiant Floor Heating             * Heat Transfer Applications         * 12V Operated Cooling Systems       * Food Liquid Transfer         * Hot Wort Transfer Pump for Home Brewing           * Sous Vide Solar Mini Water Pump, Solar DC Pump          * Solar Water Heating Systems     * Hot Water Circulation         * Radiant Floor Heating             * Heat Transfer Applications         * 12V Operated Cooling Systems       * Food Liquid Transfer         * Hot Wort Transfer Pump for Home Brewing           * Sous Vide A pneumatic tool, air tool, air-powered tool or pneumatic-powered tool is a type of power tool, driven by compressed air, supplied by an air compressor. Pneumatic Tools can also be driven by compressed carbon dioxide (CO2) stored in small cylinders allowing for portability. Pneumatic tools are safer to run and maintain than their electric power tool equivalents, and have a higher power-to-weight ratio, allowing a smaller, lighter tool to accomplish the same task. General grade pneumatic tools with short life span are commonly cheaper and are also called disposable tools in tooling industries while industrial grade pneumatic tools with long life span are more expensive. In general, pneumatic tools are cheaper than the equivalent electric-powered tools.
Air tools were formerly unpopular in the DIY (Do it yourself) market, but are becoming increasingly popular, and have always been ubiquitous in industrial and manufacturing settings.
It is important to know some general specification technical terms used in pneumatic tools while it is also related to how to choose a good air compressor and if the tool can meet your job requirement so that an air tool can be used properly, respectively, Free Speed (rpm), Air Pressure(psi/bar), Air Consumption(cfm/scfm or m3/min), Horse Power(hp), spindle size...etc. Depending on different type of pneumatic tools, there are different specification values that you need to pay attention to. Pneumatic Tools Pneumatic Tools,Pneumatic Cylinder,Pneumatic Fitting,Pressure Gauge Changzhou Edaweld Trading Company Limited , https://www.edaweld.com
Features
1. Voltage: 6V-24V DC (Rate:12V DC)
2. Soft start at very low in-rush current, good convenient working directly with PV panel
3. Advanced magnetic drive technology for static-impeller, without any leakage for ever
4. Max system pressure: 10Bar
5. Max working temperature: 110ºC (230ºF)
6. Min start-up power consumption less than 2 Watt
7. Low noise: 45dB(A) far from 1m distance
8. Heavy duty work, can sustain continual 24 hours' work
9. Low power consumption,Low or no maintenance
PV operated
For solar system loops, the TS5 pump can be powered directly from a PV panel. The sun comes up, heat builds in the solar hot water panel and at the same time electricity is made in the PV panel. The pump slowly starts with the smallest amount of current and pushes the heated water to the storage tank. It's all too simple and eliminates all controllers, thermostats and sensors.
Specification
MODEL
PV MODULE WATTS (W)
MAX FLOW(L/M)
MAX HEAD METERS(M)
TS5-A12-5PV
5
8.4
1.6
TS5-A12-10PV
10
10
2.4
TS5-A12-15PV
15
12.6
3.2
Product detail
Areas of Use
Packaging
TOPSFLO Factory
For more detail, please feel free contact us!
Features
1. Voltage: 6V-24V DC (Rate:12V DC)
2. Soft start at very low in-rush current, good convenient working directly with PV panel
3. Advanced magnetic drive technology for static-impeller, without any leakage for ever
4. Max system pressure: 10Bar
5. Max working temperature: 110ºC (230ºF)
6. Min start-up power consumption less than 2 Watt
7. Low noise: 45dB(A) far from 1m distance
8. Heavy duty work, can sustain continual 24 hours' work
9. Low power consumption,Low or no maintenance
PV operated
For solar system loops, the TS5 pump can be powered directly from a PV panel. The sun comes up, heat builds in the solar hot water panel and at the same time electricity is made in the PV panel. The pump slowly starts with the smallest amount of current and pushes the heated water to the storage tank. It's all too simple and eliminates all controllers, thermostats and sensors.
Specification
MODEL
PV MODULE WATTS (W)
MAX FLOW(L/M)
MAX HEAD METERS(M)
TS5-A12-5PV
5
8.4
1.6
TS5-A12-10PV
10
10
2.4
TS5-A12-15PV
15
12.6
3.2
Product detail
Areas of Use
Packaging
TOPSFLO Factory
For more detail, please feel free contact us!
Flow or airflow, related to air consumption in pneumatic tools, represents the quantity of compressed air that passes through a section over a unit of time. It is represented in l/min, m3, at the equivalent value in free air in conditions of standard reference atmosphere (SRA), i.e. +20 c, 65% of relative humidity, 1013 mbar, in accordance with norms NFE.
Model NO.: TS5
Theory: Centrifugal Pump
Motor: DC Brushless Motor
Max System Pressure: 10bar
Max Working Temperature: 110° C (230° F)
Low Noise: ≤ 45dB Far From 1m Distance
Lifetime: 30000hour
Trademark: TOPSFLO
Transport Package: Standard Export Packing or OEM Packing
Specification: CE, IEC, RoHS
Origin: China
HS Code: 84137090
Model NO.: TS5
Theory: Centrifugal Pump
Motor: DC Brushless Motor
Max System Pressure: 10bar
Max Working Temperature: 110° C (230° F)
Low Noise: ≤ 45dB Far From 1m Distance
Lifetime: 30000hour
Trademark: TOPSFLO
Transport Package: Standard Export Packing or OEM Packing
Specification: CE, IEC, RoHS
Origin: China
HS Code: 84137090