JKCS300 Multi-functional truck mounted water well drilling rig is an efficient, multi-function full hydraulic water well drilling rig. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration,geothermic well and other foundation working, it is popular at home and abroad. Specification                                                                                General 1 Geology drilled All kinds 2 Drilling Type DTH & Mud Rotary 3 Drill system and operation Hydraulic 4 Hole Diameter mm Φ105-Φ350 5 Hole Depth m 300 6 Rotation Torque Nm 4500   1st Gear 8000  2nd Ger 7 Rotation Speed rpm 0-80   1st Gear 0-160  2nd Ger 8 Drill pipe diameter mm 89,102,114 9 Drill pipe length mm 2500/4000 10 Axial pressure T 85KN 11  Max. Lifting force N 4000 12 Max. Feed Speed M/min 18 13  Max. Lifting Height m 8 14 Feed Stroke mm 3400 Winch 15  Max. Lifting force T 20 16 Lifting force of Main winch(Optional) T 4 17 Lifting force of hoist T 1.5 18 Length of steel wire rope(tool winch) m 100 19 Lifting height of tool winch m 8 Engine 20 Diesel Engine type CUMMINS 21 Rated Horse power  Kw 112 22  Electrical System V 24 Compressor required 23  Compressor Type Rotary Screw/Movable 24 Pressure Required Mpa 1.05-4.5 25 Air consumption m³/min 16-60 Truck 26 Manufacturer SINOTRUCK HOWO 27 Model ZZ1257M5841W 28 Engine WD615.62 29 Rated Horse power kw 196 30 Discharge Standard EU-2 31 Drive type 2*8 32 Max.Speed Km/h 102.9 33 Steering wheel left/right(Optional) Mud Pump 34 Type Hydraulic 35 Model BW450 36 Stroke mm 110 37 Displacement L/Min 450 38 Discharge pressure (Mpa) Mpa 2-3 39 Suction tube diameter mm 89 40 Discharge pipe diameter mm 51 41 Liner Diameter mm 80 Dimension 42 Net Weight T 22 43  Shipping Length mm 10600 44 Shipping Width mm 2400 45 Shipping Height mm 3050 46  Working size(L*W*H) mm 11000*2480*7147 Service                                                                                JKCS300 Multi-functional truck mounted water well drilling rig is an efficient, multi-function full hydraulic water well drilling rig. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration,geothermic well and other foundation working, it is popular at home and abroad. Specification                                                                                General 1 Geology drilled All kinds 2 Drilling Type DTH & Mud Rotary 3 Drill system and operation Hydraulic 4 Hole Diameter mm Φ105-Φ350 5 Hole Depth m 300 6 Rotation Torque Nm 4500   1st Gear 8000  2nd Ger 7 Rotation Speed rpm 0-80   1st Gear 0-160  2nd Ger 8 Drill pipe diameter mm 89,102,114 9 Drill pipe length mm 2500/4000 10 Axial pressure T 85KN 11  Max. Lifting force N 4000 12 Max. Feed Speed M/min 18 13  Max. Lifting Height m 8 14 Feed Stroke mm 3400 Winch 15  Max. Lifting force T 20 16 Lifting force of Main winch(Optional) T 4 17 Lifting force of hoist T 1.5 18 Length of steel wire rope(tool winch) m 100 19 Lifting height of tool winch m 8 Engine 20 Diesel Engine type CUMMINS 21 Rated Horse power  Kw 112 22  Electrical System V 24 Compressor required 23  Compressor Type Rotary Screw/Movable 24 Pressure Required Mpa 1.05-4.5 25 Air consumption m³/min 16-60 Truck 26 Manufacturer SINOTRUCK HOWO 27 Model ZZ1257M5841W 28 Engine WD615.62 29 Rated Horse power kw 196 30 Discharge Standard EU-2 31 Drive type 2*8 32 Max.Speed Km/h 102.9 33 Steering wheel left/right(Optional) Mud Pump 34 Type Hydraulic 35 Model BW450 36 Stroke mm 110 37 Displacement L/Min 450 38 Discharge pressure (Mpa) Mpa 2-3 39 Suction tube diameter mm 89 40 Discharge pipe diameter mm 51 41 Liner Diameter mm 80 Dimension 42 Net Weight T 22 43  Shipping Length mm 10600 44 Shipping Width mm 2400 45 Shipping Height mm 3050 46  Working size(L*W*H) mm 11000*2480*7147 Service                                                                               Â
All windshield wiper arms have a hinge at the base that allows the arm to flex as it follows the curvature of the window. If the wiper skips over certain spots, even with a new blade, chances are the hinge is binding from corrosion. It`s most common on rear window wipers since they`re used less often.
You can oil the hinge, but that`s just a temporary fix-the corrosion and binding usually return. To fix the problem permanently, replace the Wiper Arm (available at an auto parts store).
Now you`re ready to get started!
Plug-In Wiper Arm,Rear Window Wiper Arm ,Rear Windscreen Wiper Arm,Front Wiper Arm COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com
JKCS300
Application                                                                               Â
JKCS300 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling, DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
1. The drilling rig can use air DTH Hammer drilling and mud drilling. Â Â
2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3. The truck chassis adopts the 8X4 special crane chassis of brand Sino truck How o and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed system are set up on the chassis.
4. It's a hydraulic rotary drilling rig with directional circulation. It is equipped with BW450/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Cummins engine, 112kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely the after sales service begin from the order confirmation, last for the working life of the equipment.
JKCS300
Application                                                                               Â
JKCS300 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling, DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
1. The drilling rig can use air DTH Hammer drilling and mud drilling. Â Â
2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3. The truck chassis adopts the 8X4 special crane chassis of brand Sino truck How o and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed system are set up on the chassis.
4. It's a hydraulic rotary drilling rig with directional circulation. It is equipped with BW450/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Cummins engine, 112kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely the after sales service begin from the order confirmation, last for the working life of the equipment.
Is it Time to Change Your Windshield Wiper Arm?
What you`ll need to replace your windshield wiper arm:
Model NO.: JKCS300
Drilling Way: Rotary
Type: Truck Mounted
Truck Type: 4X4 or 6X4
Rotation Torque: 4800-9600n.M
Pull Back Capacity: 20ton
Trademark: JCDRILL
Transport Package: 40fr Container
Specification: 10600*2400*3050mm
Origin: China
HS Code: 8430419000
Model NO.: JKCS300
Drilling Way: Rotary
Type: Truck Mounted
Truck Type: 4X4 or 6X4
Rotation Torque: 4800-9600n.M
Pull Back Capacity: 20ton
Trademark: JCDRILL
Transport Package: 40fr Container
Specification: 10600*2400*3050mm
Origin: China
HS Code: 8430419000
Competitive Price High Quality Truck Mounted Water Well Drilling Rig Machine